Roper rud4000 User Manual download pdf (Page 11)

Canceling a Cycle

You can cancel a cycle at any time.

Turn the cycle control knob slowly clockwise until you hear

water draining. Let the dishwasher drain completely.

Open the door.

Turn the cycle control knob to Off.

Changing a Cycle or Setting

You can change a cycle anytime during a cycle.

Lift the door latch to stop the cycle.

Turn the cycle control knob clockwise.

Check the detergent dispensers. They must be filled properly

for the new cycle.

NOTE:

Turning the cycle control knob can cause the covered

detergent dispenser section to open and release the

detergent. Check the covered section if the cycle uses

detergent in both sections.

Close the door firmly until it latches. The dishwasher starts a

new cycle.

Adding Items During a Cycle

You can add an item anytime before the main wash starts, or the

cycle control knob reaches Normal Wash.

Lift up the door latch to stop the cycle. Wait for the spraying

action to stop before opening the door.

Open the door and add the item.

Close the door, but do not latch it. Wait 30 seconds for the air

in the dishwasher to warm up. This reduces the amount of

moisture escaping from the vent when restarting a cycle.

Close the door firmly until it latches. The dishwasher resumes

the cycle.

Option Selections

You can change an option anytime before the selected option

begins. For example, you can press an unheated drying option

any time before drying begins.

Energy Saver Dry

Select this option to dry dishes without heat and save energy.

The dishes take longer to dry and some spotting can occur.

For best drying, use a liquid rinse aid. Some items (such as

plastics) may need towel drying.

NOTE:

Energy Saver Dry is an option with all cycles except Rinse

& Hold.

Heated Dry

Select this option to dry dishes with heated air. For best drying

results, use a liquid rinse aid and heated drying.

NOTE:

Heated Dry is an option with all cycles except Rinse &

Hold.

Plate Warmer (on some models)

Use the Plate Warmer cycle to warm serving dishes or dinner

plates.

NOTE:

Use the heated drying option with the Plate Warmer.

Close and latch the door.

Turn the cycle control knob to Plate Warmer.

Allow 8 minutes for the cycle to heat the dishware.

Press HEAT DRY.

Drying System

During drying, you can see steam escaping through the vent at

the upper left corner of the door. This is normal as the heat dries

your dishes.

IMPORTANT:

The vapor is hot. Do not touch the vent

during drying.

Wash Rinse Rinse Main

Wash

Rinse Final

Rinse

Dry Time

(min)

Water

Usage

(gal/L)

● ●

20 2.9/10.9

Use this cycle for rinsing

dishes, glasses, and

silverware that will not be

washed right away.

Do not use

detergent

with this

cycle.

RINSE

& HOLD

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 31 32

Comments to this Manuals

No comments

Roper rud4000 User Manual Page 11

Comments to this Manuals

Related products and manuals for Dishwashers Roper rud4000