Roper TOP-MOUNT REFRIGERATOR Specifications Page 48

  • Download
  • Add to my manuals
  • Print
  • Page
    / 108
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 47
42
NEW DESIGN 14 cu. ft. Top-Mount
PHILLIPS
SCREWS
PHILLIPS
SCREWS
5. Press against the top of the air tower and disengage the two (2) clips from the evaporator
cover. Then, lift the tower and pull it forward to release the four (4) hooks and remove the
tower.
6. Remove the Phillips screw from the access cover and remove the cover.
7. Slide the ground wire clip off the tab of the evaporator cover.
8. Remove the two (2) hex-head screws from the top of the evaporator cover and the two he-
head screws from the fan motor bracket and remove the evaporator cover.
Servicing the Evaporator Fan Motor
1. Remove the two (2) screws securing the fan motor bracket to the rear wall of the freezer
section.
(Fig. 52)
2. Disconnect the three wires from the fan motor terminals (
Fig. 53, INSET
) and remove the
fan motor assembly.
(Fig. 53, Inset)
Fig. 52
Fig. 51
MOUNTING
SCREWS
MOUNTING
SCREWS
SLOTS
TABS
ACCESS
PANEL
GROUND
WIRE
MOUNTING
SCREWS
FAN
SCREW
Page view 47
1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 107 108

Comments to this Manuals

No comments