Roper TOP-MOUNT REFRIGERATOR Specifications Page 62

  • Download
  • Add to my manuals
  • Print
  • Page
    / 108
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 61
56
MID-LINE DESIGN 16 thru 22 cu. ft. Top-Mount
Servicing the Defrost Timer and Thermostat
Removing the Control Box
The control box is attached to the bottom of the divider wall separating the freezer and refrigerator
compartments. The control box contains the defrost timer and the operating thermostat.
1. Open the refrigerator door and remove the top shelf.
2. Unclip the air diffuser assembly using a small flat-bladed screwdriver and remove the
assembly from the refrigerator.
3. Remove the two (2) hex-head screws securing the control box to the top of the refrigerator
section. Lower the front of the control box slightly.
4. Disconnect the light connector from the wiring harness plug.
5. Disconnect the main wiring harness plug from the receptacle mounting in the top of the
refrigerator section.
6. Pull the control box forward to release the two (2) tabs securing the back of the control box
to the tabs in the refrigerator liner. Remove the control box from the refrigerator.
SENSOR TUBE
DEFROST TIMER
LIGHT FIXTURE
LIGHT FIXTURE
THERMOSTAT
AIR DAMPER
Fig. 68
YELLOW
BLACK
LIGHT
CONNECTORS
MAIN
HARNESS
RECEPTACLE
SLOT
SLOT
CLIPS
TAB
HEX-HEAD
SCREW
HEX-HEAD
SCREW
AIR
DAMPER
CONTROL BOX
AIR DIFFUSER
ASSEMBLY
MAIN
HARNESS
PLUG
Fig. 67
Page view 61
1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 107 108

Comments to this Manuals

No comments