Roper TOP-MOUNT REFRIGERATOR Specifications download pdf (Page 67)

MID-LINE DESIGN 16 thru 22 cu. ft. Top-Mount

Removing the Freezer Floor and Evaporator Cover

Access to the component behind the evaporator cover and removing the air tower can be accom-

plished by removing the freezer floor and evaporator cover.

Removing the Freezer Floor

1. Remove the ice cube tray, bin and shelf (if present) or remove the automatic ice maker.

2. Remove the two (2) Phillips screws securing the front of the freezer floor to the freezer liner

and slide the floor out of the freezer.

Removing the Evaporator Cover

1. Remove the Phillips screw securing the Ice Maker Wiring Access Cover to the Evaporator

Cover and remove the Access Cover.

2. Remove the two (2) Phillips screws from the top of the Evaporator Cover on both sides of

the Air Tower.

3. Pull the top of the Evaporator cover forward and carefully lift the base of the Air Tower out of

the freezer liner cutout and remove the Evaporator Cover.

Removing the Air Return Covers

Each Air Return Cover consists of two (2) sections. When lifting the Air Return Covers out of the

freezer liner, hold the sections together so that the front section does not fall into the air return

chute.

(Fig. 75, Inset 1)

Removing the Air Tower

Remove the hex-head screws from the back of the Evaporator Cover, and release the two (2) tabs

at the top of the Air Tower, and remove the Air Tower from the Evaporator Cover.

(Fig. 75, Inset 2)

PHILLIPS-HEAD

SCREW

PHILLIPS-HEAD

SCREW

PHILLIPS-HEAD

SCREW

AIR

TOWER

AIR RETURN

COVERS

INSET #1

INSET #2

SLOTS

TAB

HEX-HEAD

SCREW

Fig. 75

1 2 ... 62 63 64 65 66 67 68 69 70 71 72 ... 107 108

No comments

Roper TOP-MOUNT REFRIGERATOR Specifications Page 67